by EventDraftingAdmin | Nov 3, 2020 | Rigging Calculations
The Minneapolis Convention Center has a dome that is a dream for lighting designers. This 144 foot circular truss was the anchor for the lighting vision. The 13,000 pound LED wall was the mainstay for all the presentations.
by EventDraftingAdmin | Oct 30, 2020 | Hand Drafting
Scott Parker shows scale ruler worksheet Using a scale ruler to measure and mark drawings with needed measurements is an important skill to master for anyone working on technical drawings. Subscribe Transcript.So on the scale ruler worksheet, we’re going to take...
by EventDraftingAdmin | Oct 16, 2020 | Seating Layouts, Vectorworks Advanced
https://youtu.be/Ypx-2_BdO0E Vectorworks Seating Sections using Known Section Size is an easy method of laying out seating for events held in hotel ballrooms and conference centers.
by EventDraftingAdmin | Oct 16, 2020 | Fire Marshal Plans, Vectorworks Basics
https://youtu.be/81lbivORfTM Using Vectorworks with Fire Marshal Plans to figure out required paths of egress and aisle spacing. If you would like work create your own seating layouts with Vectorworks, this tutorial is the first of several covering how to read the...
by EventDraftingAdmin | Oct 5, 2020 | Hand Drafting
Adding dimensions to light plot pipe Including lighting unit dimensions will save you a lot of time during your load-in. You don’t want to have technicians measure with a scale ruler each time. Here I show how to use a scale rule on a pipe full of lights to add...
Recent Comments